A.Configure2CFFhcombinationfibrechannel/gigabitEthernetadapters
B.Configure1CFFh2-portfibrechanneladapterand1CIOv2-portgigabitEthernetadapter
C.Configure1CIOv2-portfibrechanneladapterand1CFFhcombinationfibrechannel/gigabitEthernet adapter
D.Configure1CIOv2-portgigabitEthernetadapterand1CFFhcombinationfibrechannel/gigabitEthernet adapter
A.The adapter must be taken offline prior to the firmware update.
B.The system has not been rebooted since the adapter was added to the LPAR.
C.The adapter must be assigned to the service partition prior to updating the firmware.
D.The adapter must be dynamically removed from the LPAR prior to updating thefirmware.
A.shutdown -Fr
B.cfgmgr -i <lpp_source>
C.mkdev -l <device_name>
D.mknode /dev/<device_name>
A.A
B.B
C.C
D.D
A.lspath
B.sdd query adapter
C.pcmpath query adapter
D.datapath query device
A.Advise the tape operator to review the hardware service guide.
B.Use the diag command to set the Ethernet adapter slot LED to flash.
C.Advise the tape operator to check the WWN stickers of all Ethernet adapter in the I/O drawers.
D.Create a login account for tape operator on the HMC and advise the tape operator to locate the adapter using the GUI step by step.
A.802.1Q
B.Virtualswitch
C.LogicalHostEthernet(LHE)Adapter
D.SharedEthernetAdapter(SEA)Trunking
A.1 - 7
B. 1 - 16
C. 0 - 7
D. 0 - 15
A.on the SRP
B.on the I/O adapter
C.on the egress line module
D.on the ingress line module